Solasyphon - Specifications
Specifications
- Shell height800mm
- Overall height including connections1000mm
- Shell diameter75mm
- Overall diameter
including insulation jacket112mm - Weight when empty5.37kg
- Weight when full (both primary and secondary fluid ways)7.67kg
- Primary fluid capacity0.5lit
- Secondary fluid capacity1.8lit
- Heat exchanger surface area m2/lit secondary water content0.5m2/lit
- Maximum working pressure5 bar
- Test pressure10 bar
- Warranty25 years
- Solar flow connection (primary flow)15mm
- Solar return connection primary return)15mm
- Solasyphon cold feed(secondary cold feed)22mm
- Solasyphon gravity flow (secondary flow)15mm
Typical Cylinder
- Flow (Indirect only)
- Return (Indirect only)
- Pressure reducing valve
- Check and expansion valve
- Temperature & pressure relief valve
- Tundish
- Immersion heater
- Thermostat
- Cold feed tube (not supplied)
- Hot water outlet
- Flexible hose
- Secondary return 1/2 BSPF Conex 645 tee piece (not supplied)
- Comissioning valve
- Combined cold feed elbow
and drain cock - Cable entry
- Electrical boxes
- Tee piece
- Discharge pipe (not supplied)
- Motorised valve (not factory fitted)
Materials
Outer shell and internal heat exchangerconstructed from solid drawn copper to EN 1057: 1996. All joints brazed with Silver Copper Brazing Alloy to EN ISO3677:1995 CP105
Insulation jacket manufactured with 40mm rockwool section (CAS number 287922-11-6) with removable flame retardant fabric cover.
Independent performance tests carried out by University of Ulster.
Patent no. 0620266
